Winnipeg Free Press - PRINT EDITION
Getting the gears
Transmission plays key role in fuel usage
Automakers are spending billions of dollars to squeeze efficiency from a car part most people never think twice about -- the transmission.
In the next five years, many new vehicles will have transmissions with up to 10 speeds, replacing the mostly six-speed transmissions in cars now. Though designed for refinement and performance, the transmissions aim mostly to help meet stricter federal fuel economy and pollution standards.
"We are trying to extract efficiency out of every subsystem of the vehicle," said Mircea Gradu, vice-president of transmission and driveline engineering at Chrysler Group. "There are very aggressive targets that are in front of us."
This year, Chrysler has already added eight-speed transmissions to some of its Ram trucks and a couple of Chrysler sedans and will offer a nine-speed gearbox in the Jeep Cherokee this fall, as well as in the Dodge Dart.
In April, General Motors Co. and Ford Motor Co. launched a joint project to create nine-speed and 10-speed transmissions for their cars and trucks.
By 2020, transmissions with more than seven speeds will be found in 54 per cent of new vehicles, up from just two per cent in 2010, according to forecasts from research firm IHS Automotive.
The transmission investments give automakers "bang for the buck," Gradu said, with as much as 10-per-cent fuel savings.
"Transmissions are among the lower-hanging fruit," added Roland Hwang, transportation program director for the U.S. Natural Resources Defense Council.
The new gearboxes allow engines to operate in a sweet spot for the task at hand, whether speeding up a highway on-ramp, cruising at 100 km/h or towing a boat. At highway speeds, an eight-speed transmission reduces the engine's revolutions per minute from 2,000 in a six-speed gearbox to about 1,700 rpm, depending on engine size.
Drivers should notice a smoother ride because engines won't work as hard. The jumps, or steps, between gears will be smaller, making shifts less abrupt. Extra gears also keep the engine from needlessly lugging or revving.
The transmissions provide another example of government regulations spurring industry innovation, Hwang said.
"Not only are you saving money on gasoline, but you are also getting technology that will give you a better driving experience," he said.
Gabriel Shenhar, senior auto test engineer at Consumer Reports, agrees.
"We have driven many of the eight-speed transmissions, and they are terrific," Shenhar said. "They shift imperceptibly and are very quick. The transmission is almost reading your mind, figuring out the terrain you are driving through and knowing your position on the gas pedal."
When he first noticed automakers adding gears, Shenhar suspected a marketing ploy. "Five years ago, we thought this was just one-upmanship," he recalled. Then, a seven-speed transmission was the most advanced, Shenhar said. But Toyota soon installed an impressive eight-speed transmission in the Lexus LS.
"Now, we think the new multispeed transmissions are terrific and set a new benchmark," he said.
Craig Renneker, Ford's chief transmission engineer, was another skeptic. He admits that he once didn't believe that nine- and 10-speed transmissions were feasible. Now he's designing them.
Several improvements paved the way for more gears, reducing drag on moving parts. Engineers have improved the flow of lubricants inside gearboxes, limiting friction. They also are able to use thinner oil and to better control its viscosity.
At the same time, Renneker said, new software allows for more precise shifting and more complicated transitions between gears.
At a transmission conference in a Detroit suburb earlier this year, engineers from all the major automakers and suppliers met to discuss the looming fuel-economy regulations and automotive improvements. They debated the "hot question" of whether transmissions would continue to add gears beyond the current 10 speeds.
"Are we done with the speed race?" Renneker asked. "The short answer is, we just don't know at this point."
--Los Angeles Times
Republished from the Winnipeg Free Press print edition October 18, 2013 A1
Have you found an error, or know of something we’ve missed in one of our stories?
Please use the form below and let us know.
Having problems with the form?Contact Us Directly
(1 of 13 articles for this week)10:03 AM 0
OSHAWA, Ont. - General Motors Canada says it plans to hire more than 100 software and controls engineers to support ...
Photo Store Gallery
Ads by Google