Latest News

The Canadian Press - ONLINE EDITION

Pratt & Whitney uncover fraudulent engine testing, Transport Canada notified

By: The Canadian Press

Posted: 03/4/2013 10:54 AM | Comments: 0 | Last Modified: 03/4/2013 5:26 PM

This photo taken Feb. 5, 2010, shows a "Pratt & Whitney Dependable Engines" emblem at the plant in East Hartford, Conn. THE CANADIAN PRESS/AP, Jessica Hil

EAST HARTFORD, Conn. - A longtime scheme involving fraudulent parts testing has been uncovered at one of the subsidiaries of the parent company that owns airplane engine-maker Pratt & Whitney Canada.

Pratt & Whitney, which is based in East Hartford, Conn., said Monday it notified Transport Canada about the issue in September 2011, even though the fraudulent tests are not considered to be a public safety concern.

"Thorough internal audits were conducted using original, unaltered test data to confirm the quality of the parts in question," said company spokeswoman Stephanie Duvall in an email Monday.

"There have been no product recalls, service bulletins, or airworthiness directives, and there are no flight safety risks."

The scheme, believed to have been carried out for more than 15 years, was discovered at Carmel Forge Ltd. in Israel, a subsidiary of United Technologies Inc. (NYSE:UTX), which owns Pratt & Whitney.

An internal investigation was initiated in June 2011 after an employee anonymously reported that test data had been routinely adjusted during this period at the plant near Haifa, Israel.

As a result, the company discovered that employees had doctored metallurgical test results to make certain engine forgings appear to meet strict standards when in fact they did not, as part of an effort to minimize more testing.

Transport Canada says it reviewed a summary of the investigation by Pratt & Whitney was "satisfied" with the corrective actions taken by the company.

"As a result, the department did not need to take any further action," the department said in an email.

Pratt & Whitney says Carmel Forge has also notified the Federal Aviation Administration and its customers regarding the fraudulent tests.

"Through the course of their oversight, Transport Canada and the FAA determined that there was no need to issue airworthiness directives," said Duvall.

Montreal-based Bombardier (TSX:BBD.B) declined comment except to say that "Pratt and Whitney is a trusted supplier."

Pratt & Whitney says Carmel Forge has made personnel changes, established stronger software controls, purchased test equipment and taken other steps to prevent adjustments to original test data.

"Carmel Forge remains confident in the quality, integrity and safety of its products," said Duvall.

The Federal Aviation Administration said in a statement it found no evidence of non-conforming parts at Carmel Forge and did not issue fines or other penalties.

The agency also said no special FAA assessments or reviews of the facility are underway. It said it agreed with Pratt & Whitney's corrective action plan and agrees with Pratt & Whitney's assessment that there are no data indicating any in-service issues.

No maintenance schedules were adjusted as a result of the investigation, and the parts are performing as expected, the FAA said.

Pratt & Whitney is a unit of United Technologies Corp., a diversified company that includes Otis Elevator, Sikorsky helicopter, Carrier heating and cooling and other aerospace and building system businesses. Its Canadian subsidiary is based in Longueuil, Que.

— With files from the Associated Press

Fact Check

Have you found an error, or know of something we’ve missed in one of our stories? Please use the form below and let us know.

* Required

In which story did you find the error? *
Please post the headline of the story or the title of the video with the error.
What was the error? *
Please post exactly what was wrong with the story.
What should we have written?
Please indicate your source for the correct information.
Who else should we interview to improve this story?
Please include any contact information you may have.
Can we contact you in the future for advice on stories about this topic?
Yes

No
First Name: *
Last Name: *
E–mail Address: *
This will only be used to contact you if we have a question about your submission, it will not be used to identify you or be published.
Phone: *
This will only be used to contact you if we have a question about your submission, it will not be used to identify you or be published.
Colour:
Are you blue? If you can see this, leave it blank and get some CSS support.
Enter the words that you see: * This is to prevent our forms from being filled out automatically.
You have failed to correctly identify the words in the box above. Please try again.

More Latest News

Undock

You can comment on most stories on winnipegfreepress.com. You can also agree or disagree with other comments. All you need to do is register and/or login and you can join the conversation and give your feedback.

Have Your Say

New to commenting? Check out our Frequently Asked Questions.

The Winnipeg Free Press does not necessarily endorse any of the views posted. By submitting your comment, you agree to our Terms and Conditions. These terms were revised effective April 16, 2010.