Winnipeg Free Press - PRINT EDITION
Posted: 11/19/2013 1:00 AM | Comments: 0
Kor Ecologic Inc. founder Jim Kor has been described as a shaggy introvert and a hermit.
Yet this Winnipeg-based engineer is out to change the world with the Urbee, a unique hybrid vehicle that dares to be plastic, can zip across the country on 10 gallons of fuel and is manufactured using a sophisticated 3-D printer.
"We want to create the greenest car on Earth," said Kor, who designs tractors and city buses for mass production.
Kor snatched the idea from nature. The Urbee, an electric vehicle with ethanol backup, needed to be light and strong like a falcon and fast like a cheetah. But making this happen took a special 3-D printing technology to deliver strength and speed at a low weight.
By late 2011, Kor and his team had designed their dream. They built the car's body in Stratasys' RedEye 3-D printing factory in Eden Prairie, Minn.
Computers read the design software and "printed" each car part layer by layer. A plastic bumper was born, then a hood and so on. While 3-D printing has long been used to make gears, grilles, tools, parts and prototypes for other manufacturers, it had never been used to build the entire body of a car.
"It became the first car to have its body 3-D-printed," Kor said. "Now it's the greenest practical car ever made. The Urbee uses eight times less energy than the average little car."
Stratasys, the leader in the 3-D printing world, is thrilled about the vehicle's possibilities. "Without 3-D printing, you can't make a car as efficient as this one," said Stratasys spokesman Joe Hiemenz.
Traditional prototyping takes years of altering designs, tooling and materials. With 3-D printing, designers can tweak details on a computer and click the Print icon.
Once printed, the Urbee car parts were shipped and assembled back in Kor's lab in Winnipeg. They were outfitted with two electric motors and a small ethanol engine. Today, the two-seater, three-wheeled Urbee is on tour. It's in England this month, where science and car enthusiasts are going ga-ga over the vehicle.
"One day all cars will look like this... I'd like to license two-and-a-half billion Urbees," Kor said with a laugh, noting there are only 1 billion cars in the world today. The goal is to commercialize his baby and to sell each one for about $16,000, the price of a Fiat 500. "We need a sustainable car like this. But it has to be low-priced and affordable," Kor said.
Two weeks ago, Stratasys customer service supervisor Ashley Voigt hoisted a red Urbee bumper from one of Stratasys' refrigerator-sized printing machines. "This one took a straight day and a half to make. We could have made it faster if we didn't care how it looked," Voight said. By taking the time to precisely lay each plastic fiber, she got a smooth, high-resolution surface that looks like a finished part.
During an industry conference at Stratasys last month, Kor said he has already designed the Urbee 2. The first-generation Urbee gets 70 miles per gallon of fuel, while the Urbee 2 will get 120 to 290 miles per gallon.
But Kor first needs $3 million to convert drawings into reality. Fundraising started Oct. 30. If successful, production will begin in 2014 at Stratasys' RedEye 3-D printing factory in Eden Prairie. A cross-country drive from New York to San Francisco is scheduled for 2015. On board will be Kor, his son and dog.
"We'll start with a half-scale model car in 2014. Once we have that tested, we are only a month away from making the full-scale model," Kor said. Because all the design components are in the computer, it doesn't take long to scale up.
Hiemenz said Stratasys is excited by Urbee's possibilities. "Jim is this long-haired and small-town guy with a great idea. This car can be charged from a garage outlet or with power from a solar panel kit attached to the car."
The Urbee is one of the sexier outcomes of the 3-D printing revolution. Twenty years ago, 3-D plastic "printing" was a garage hobby. Now it's a $2.2 billion industry enthusiastically embraced by General Electric, General Motors, UPS and others.
"It took 20 years to make $1 billion. It only took five years to grow to $2.2 billion. We predict it will take three years to double again" and by 2021 will be a $10.8 billion industry, said Tim Caffrey, an industry consultant with Wohlers Associates.
As for Kor, he said "no thanks" to metal. For him, the beauty of the Urbee is its aerodynamic and lightweight structure. "We tried metal. We built a clay car. We scanned and simulated the aerodynamics," Kor said.
In the end, the strong plastics proved best.
-- Minneapolis Star Tribune
Republished from the Winnipeg Free Press print edition November 19, 2013 B3
Have you found an error, or know of something we’ve missed in one of our stories? Please use the form below and let us know.
Having problems with the form?Contact Us Directly
AP source: Thieves got into 1K StubHub accounts
GateHouse Media parent to buy Providence Journal
Government drafting birth control accommodation
Manufacturing rebound seen
FAA tells US airlines not to fly to Tel Aviv
Gulf oil spill: Ex-BP engineer's retrial postponed
Undercover probe finds health law failings
Scraping together a handsome bottom line
BCSC panel finds notary committed fraud
CEO: Rivers to quit Clippers if Sterling stays
Beretta: Gun law forcing move out of Maryland
Legal marijuana milestone heads for Seattle museum
A's agree to 10-year lease to stay in Oakland
Oops! EPA goes off topic, tweets about Kardashian
7 ex-NFL players appeal terms of concussion deal
LinkedIn to buy ad tech company Bizo for $175M
Most actively traded companies on the TSX
Discover Financial's 2Q profit jumps 7 per cent
Apple's fiscal 3Q earnings top analyst forecasts
Rogers jobs cuts could affect profitability
Microsoft CEO sees 'bold' plan as 4Q tops Street
Ford names Galhotra as Lincoln's new president
Jeep SUVs recalled for ignition switches
The top 10 books on Apple's iBooks
Exxon Mobil says it'll follow new anti-bias rules
Ackman goes after Herbalife's nutrition clubs
Agropur co-operative to buy U.S. dairy assets
Target debuts an image-recognition shopping app
Spotify's Top 10 most streamed tracks
LexisNexis buys Wolters' Cdn legal business
Protect yourself from identity theft
Dan Borislow, magicJack inventor, dies at 52
Ford says new F-150 can compete with rivals
Air Canada cancels Toronto flight to Tel Aviv
Juices get trendy; can V8 ride the trend?
Airlines ban flights to Israel after rocket strike
Judge nixes lawsuit over Empire State Building IPO
PrairieSky shares rise on inaugural results