Local

Winnipeg Free Press - PRINT EDITION

A cold blast from the past Blog of the week: West End Dumplings

Winnipeg was once the industrial hub for car-window frost shields

By: Christian Cassidy

Posted: 01/27/2013 1:00 AM | Comments: 0

Enlarge Image

Ad for frost shields from a 1952 edition of the Winnipeg Free Press.

Enlarge Image

Story from a 1955 edition of the Winnipeg Free Press about the mandatory use of frost shields.

Here's a test to see how old you are: Do you remember car-window frost shields?

For those who don't, they were squares of plastic -- slightly raised -- with an adhesive strip around the edge. You stuck them to the inside of your car windows and the vacuum created in the space between the plastic and the glass kept the inside of the window from fogging or frosting up in the cold. (The Ashdown's ad markets a more expensive version consisting of a sheet of glass with a rubber gasket.)

Frost shields burst onto the automotive scene in the winter of 1926-27, long before front- and rear-window defrosters were a gleam in the eye of an automotive engineer. They were soon a standard part of a basic winter tune-up, along with radiator grill covers and winter anti-freeze.

In 1937, it became law your windshield, rear window and front-row side windows had to be fitted with frost shields from Dec. 1 to March 31. When spring came, the car owner then had the unenviable task of trying to remove what was left of the shield and its adhesive residue.

As windshield defrosters became more commonplace in the 1950s and rear-window defrosters in the 1970s, the demand for frost shields diminished. You might be surprised to know, though, their use is still noted in Manitoba's Highway Traffic Act:

Frost Shields Required

57(2) The windshield, rear windows, and windows at both sides of the driver's seat, of every motor vehicle at all times between the first day of November in each year and the thirty-first day of March next following, both dates inclusive, shall be equipped with adequate frost shields of a size and type that will prevent or minimize the condensation thereon of moisture in the atmosphere and allow the driver to have a view sufficiently clear and unobstructed to permit him to operate the vehicle with safety to other persons and vehicles on the highway, unless the vehicle is otherwise so equipped or constructed as to secure a like result.

Winnipeg was a hub for the manufacture of frost shields. In the mid-1940s, there were at least four companies that manufactured them. James B. Carter Ltd. was likely the largest and sold them across the country. Through various mergers, the company became Temro Phillips, which still manufactured interior car heaters in Winnipeg until the plant closed in 2012.

In case you think frost shields have disappeared into history, they haven't. They are still used in construction equipment, helicopters and outbuildings. The only company I could find that still manufactures them is, of course, right here in Manitoba: Custom Tarps and Filters in Brandon!

Republished from the Winnipeg Free Press print edition January 27, 2013 A10

Fact Check

Have you found an error, or know of something we’ve missed in one of our stories? Please use the form below and let us know.

* Required

In which story did you find the error? *
Please post the headline of the story or the title of the video with the error.
What was the error? *
Please post exactly what was wrong with the story.
What should we have written?
Please indicate your source for the correct information.
Who else should we interview to improve this story?
Please include any contact information you may have.
Can we contact you in the future for advice on stories about this topic?
Yes

No
First Name: *
Last Name: *
E–mail Address: *
This will only be used to contact you if we have a question about your submission, it will not be used to identify you or be published.
Phone: *
This will only be used to contact you if we have a question about your submission, it will not be used to identify you or be published.
Colour:
Are you blue? If you can see this, leave it blank and get some CSS support.
Enter the words that you see: * This is to prevent our forms from being filled out automatically.
You have failed to correctly identify the words in the box above. Please try again.

More Local

Undock

You can comment on most stories on winnipegfreepress.com. You can also agree or disagree with other comments. All you need to do is register and/or login and you can join the conversation and give your feedback.

Have Your Say

New to commenting? Check out our Frequently Asked Questions.

The Winnipeg Free Press does not necessarily endorse any of the views posted. By submitting your comment, you agree to our Terms and Conditions. These terms were revised effective April 16, 2010.